TLK50
|
DESCRIPTION |
UNIT |
TECHNICAL PARAMETER |
|
| Screw Diameter | mm |
28 |
30 |
| Injection Capacity | cm³ |
65 |
75 |
| Injection Weight | g |
59 |
68 |
| Injection Rate | g/s |
28 |
33 |
| Plasticizing Capacity | g/s |
7.2 |
8 |
| Injection Pressure | Mpa |
244 |
213 |
| Screw Speed | rpm |
0-220 |
|
| Clamp Tonnage | KN |
500 |
|
| Moulding Board Movement | mm |
240 |
|
| Space Between Tie-bars(W*H) | mm |
280*260 |
|
| Max Mould Thickness | mm |
290 |
|
| Min Mould Thickness | mm |
100 |
|
| Ejector Distance | mm |
61 |
|
| Ejector Tonnage | KN |
27 |
|
| Max Pump Pressure | Mpa |
16 |
|
| Pump Motor Power | KW |
5.5 |
|
| Hester Power | KW |
3.45 |
|
| Machine Dimensions(L*W*H) | m*m*m |
3*1.25*1.7 |
|
| Machine Weight | T |
1.6 |
|